User's Manual

PICS User’s Manual 07 June 2004
24
[IO_GATE]
RED_A=0,0x01
GREEN_A=0,0x02
YELLOW_A=0,0x04
YELLOW_B=0,0x08
GATE=1,0x10
BLUE_A=0,0x20
LOOP_ENTER=1,0x40
LOOP_EXIT=1,0x80
GATE IDLE UP=1
GATE TIMEOUT=15
[MSG_GATE]
COMPORT=101
BAUD RATE=9600
PARITY=NONE
DATA BITS=8
STOP BITS=1
TERMINATION CHAR=13
HEX CONVERT=0
[KEYPAD]
PORT=-1
BAUD RATE=9600
PARITY=NONE
STOP BITS=1
DATA BITS=8
TERMINATION CHAR=35
Table 3 Lane Configuration File Field Definitions
Section Field Meaning
DEBUG ENABLE
1 allows additional debug messages
to be printed
GATE INTERFACE
COUNT
Number of interfaces to support
(IO_GATE, MSG_GATE)
ID UNIT COM PORT
Com port to use for RF
communication. (0 and 1 for
hardware I/F, 100 and up for USB to
RS-232 I/F)
ID UNIT BAUD RATE Should be set to 38400
SYSTEM
DISPLAY ENABLE
Set to 0 to disable message output to
the monitor. Typically should be left
at 1.