User's Manual

9
5) Camera volume- Increase or decrease the volume of audio from monitor side
6) Zoom –Achieve large image on this function.
7) A/V Out – Chooses the TV system for A/V output.
8). Screen Saver – 5 pictures are stored in the system. You can select one picture to make it be shown
on the LCD screen in scan mode. Or you can select Blank screen to make the LCD screen display
nothing in scan mode.
9) Format—Deleted all the data from SD card
10).Default– Choose Yes to reset the receiver to factory defaults. All menu settings will be reset.
NOTE: Resetting the receiver will not reset all camera pairing.
Date & Time
You can set the time value with YY MM DD HH MM to show in the
monitor screen.
Brightness
The Brightness is used to adjust the brightness of the image.
Use the LEFT
and RIGHT arrows to change the bar from
DARKEST (left) to LIGHTEST (right). Press the OK button to
confirm the change.
Temperature Unit
The ℃ or ℉unit has exist to been selected to show the
temperature in the monitor screen
Temperature Alert
The menu is to set the temperature range of audio alert. When the
temperature on the camera side is out of the range, the monitor will
beep to alert you.
Use LEFT
and RIGHT arrows to select low temperature or high
temperature, then use the UP and DOWN ▼▲ arrows to set the
temperature value. After successfully setting the temperature range,
choose ON and then press the OK button to confirm the setting.