User's Manual

7
Viewing Mode
1. Signal Indicator – The signal indicator shows the strength of the signal being received from the
camera. The number of bars in the signal indicator shows the strength of the signal – One or No Bars
indicates the signal is poor, and 4 bars indicate a very strong
signal.
Signal Indicators:
2. Channel Indicator – Displays the current channel
number. Press the RIGHT ► arrow on the receiver to switch between available cameras.
Note: To automatically switch between channels, press the LEFT
arrow (AUTO).
Low Signal / No Signal Warnings
When the camera is positioned too far from the receiver, warning messages will be displayed, and there
will be one 2 beeps sound alert to remind you the no signal
Adjusting the Receiver Volume
The receiver volume can be adjusted by using the
UP/DOWN▲▼ arrows when viewing a camera.
Press the DOWN▼ arrow to decrease the volume, and press
the UP▲ arrow to increase the volume. When the volume is set
to one bar (lowest setting), the volume is muted.
The volume adjustment icon will be displayed during volume