TWEAKER-40 Owner’s Manual TWEAKER-40 HEAD
TWEAKER-40 HEAD Greetings……….. I would like to personally thank you for choosing Egnater as your “Tone Partner”. Our goal is to provide you with the best tools we can to help you express yourself to the fullest. Your amplifier is an integral piece in your never ending “Tone Quest”. Our commitment to helping you achieve that goal is our passion. Our hope is that you will take advantage of the years of innovative tube amp designs we offer and use it to find the sound that is “in your head”.
YOU’RE OFFICIALLY A TWEAKER!! Congratulations. You have just entered the world of “Tone Tweakers”. The Tweaker-40 is your next step into the never ending quest for “The Tone”. The Tweaker-40 gives you double the tone, power and features of our original Tweaker. The 40 sports two identical channels for easy, seamless switching between two preset Tweaker tones. Powered by a pair of 6L6 power tubes for a solid 40 watts of room filling power, the 40 could be your ultimate gigging amp.
TWEAKER-40 HEAD IMPORTANT INFORMATION Please keep this instruction manual for future reference and for the duration of owning this Egnater Tweaker. Please carefully read and understand the instructions inside this user’s manual before attempting to operate your new amp. This instruction manual includes essential safety information regarding the use and maintenance of the Tweaker. Take special care to heed all warning symbols and signs inside this manual and those printed on the amplifier itself.
FOLLOW THESE SAFETY PRECAUTIONS 1. Read Instructions – All the safety and operating instructions should be read before this product is operated. 2. Retain Instructions – The safety and operating instructions should be retained for future reference. 3. Heed Warnings – All warnings on the amplifier and in the operating instructions should be adhered to. 4. Follow Instructions – All operating and use instructions should be followed. 5.
TWEAKER-40 HEAD 1) COOL BLUE PILOT LIGHT: Tells you the amp is ON and ready to rock. 2) ON/OFF SWITCH: Turns the main power On and Off. NOTE: The correct procedure for turning ON and turn OFF is as follows: When first powering the amp ON, always have the STANDBY switch in the STANDBY position. Turn the POWER switch ON. Wait about 30 seconds or longer before moving the STANDBY switch to PLAY. Reverse this procedure when turning the amp off. Turn the STANDBY off first, followed by POWER off.
QUICK START GUIDE to take some of the “honk” out of your humbucking pickups. Try it on your high gain settings to get some serious “metal-ish” chunk. 18) CHANNEL 1 GAIN: This controls the amount a “drive” in the preamp. Low settings of the GAIN knob (with higher settings of the VOLUME knob) will keep the sound big, full and beautiful. You can also use higher settings of the GAIN knob to push the channel into overdrive and get some really raucous rock & roll crunch tones.
TWEAKER-40 HEAD FINDING THE SOUND YOU WANT! Below are some suggested knob settings to get you started. Keep in mind these are merely suggestions. You are encouraged to experiment to find “your tone”. SHIMMERING CLEAN ROCKIN’ TWANG CALIFORNIA CLEAN CALIFORNIA CRUNCH BRITISH CLEAN ‘‘ PRISTINE CLEAN Let your ears create the tones, not your eyes.
FINDING THE SOUND YOU WANT! con’t BLUES DELUXE BLUES SOLO SMOOTH JAZZY CLEAN SMOOTH JAZZY SOLO BRITISH RHYTHM BRITISH LEAD TONE TIPS FOR TWEAKERS....... 1) Both channels on the TWEAKER-40 are identical. Same gain, same tone, same everything for a seamless transition between sounds. 2) The suggested settings above are just that ....... SUGGESTIONS. Use these as a starting point to TWEAK from. Turn the knobs. Flip the switches. Get a feel for what each one does. Think of each control as another color.
TWEAKER-40 HEAD REAR PANEL 1) AC INLET and FUSE: Connect a universal IEC type power cord. Be sure the proper value fuse is installed that matches the ratings as indicated for your country on the rear panel. 2) AC VOLTAGE SELECTOR: Makes the Tweaker-40 compatible with the line voltage in any country. Proper setting of this switch is absolutely critical. Be sure the switch position matches the line voltage in your country.
REAR PANEL 50/60Hz 300 WATTS high quality shielded cable from the series send jack to the effect input. Set the LEVEL switch to LINE (pushed in). b) Adjust the effects unit input level to “just peak”, if the effect has a level indicator, while playing your most aggressive licks. If the effect does not have a level indicator, you can skip this step. c) Now connect another high quality shielded cable from the effect output to the return jack.
TWEAKER-40 HEAD CONNECTING YOUR SPEAKERS 112X 112X 112X information.
TWO-BUTTON FOOTSWITCH 13
TWEAKER-40 HEAD FEATURES AND SPECIFICATIONS GLOBAL FUNCTIONS: • • • • • • • • CHANNEL FUNCTIONS: 4/8/16 ohm Impedance Selector Switch Master Treble, Middle, Bass controls Master BRIT/AC/USA EQ switch Two Footswitchable Channels Buffered Series Effects Loop with Level Switch (Instrument or Line) International Voltage Selector Two Button Footpedal for Channel and Effects Loop Front Panel Channel Select Pushbutton • • • Separate Gain and Master Volume Controls for Each Channel Deep/Tight, Normal/Bright,
Your own settings............
TWEAKER-40 HEAD LIMITED WARRANTY Thank you for choosing Egnater. Egnater manufactures some of the world’s most innovative all-tube amplifier, combos and speaker cabinets. Egnater takes great pride in thoroughly testing each product prior to shipment. AMPLIFIERS, COMBOS AND SPEAKER CABINETS: Egnater offers a three (3) year warranty to the original purchaser that an Egnater product will be free from defects in material and workmanship. A dated sales receipt will establish coverage under this warranty.