Owner`s manual

if you are looking for a little more power
amp breakup.
NOTE: Keep in mind, especially
when playing live with the band, your
amp will only go as loud as your power

be louder, be sure to increase the WATTS
knob instead of the volume. If you have
the WATTS knob too low, turning up the
VOLUME control will only result in more
distortion, not more volume.
19) TUBE MIX: This is one of the neatest
features on the Rebel 30. Inside the amp

pair of 6V6 tubes. This unique knob allows
you to select a tone with a more “British
bark” by rotating the knob all the way to
the EL84 side. Setting the knob all the
way clockwise brings out the smoother,
creamier tone of the 6V6 tubes. If that
alone wasn’t enough, you can also blend
the tubes together for a unique combina-
tion of the two giving you a tonal range
not found in other amps.
NOTE: When the knob is all the way
to the EL84 or 6V6 end of the control, the
maximum power output is about 20 watts.

unique mix of the tubes and also ups the
power to 30 watts.
20) PILOT LED: Cool blue color.
21) STANDBY SWITCH: In the cen-
ter (STANDBY) position, the Rebel is
warmed up and ready to go instantly when
switched to PLAY or SILENT RECORD.
Move the switch to the PLAY position for
live performance. The SILENT RECORD
mode is a great feature that allows you
mute the speaker output(s) and automati-
cally connect the internal load resistor.
This lets you to record directly from the
RECORD LINE OUT on the rear without
having to listen to the speaker(s). Perfect
for late night recording when the family is
asleep.
QUICK START GUIDE
7
1
3
6
7 8
10
12
13
14
15
16
17
18
21
2
4
5
9
11
19
20
1
2
3
4
5
6
7
8
9
10
11
12
13