Owner`s manual

TWEAKER-88
12
CONNECTING YOUR SPEAKERS
Egnater 4x12A/B
212X
Set Impedance
switch to 16 ohms
To 16 ohm
input jack
To 8 ohm
mono input
Set impedance
switch to 8 ohms
Always set the impedance switch to match
the cabinet impedance. To determine the
proper setting using multiple cabinets of the
same impedance, simply take the impedance
of one cab divided by the number of cabi-
nets. For example, if you have two 16 ohm
cabs, simply divide 16 by 2 for a total load of
8 ohms. Also, when using two cabinets,
you can connect a cable from the head to one
cabinet. Then use another cable to “jump“ to
the other cabinet. This is the same as running
two cables from the head MAIN and EX-
TENSION jacks to each cabinet indvidually.
Whichever is more convenient is acceptable.