Owner`s manual

CONNECTING YOUR SPEAKERS

Tweaker

Speaker�Hookup

Tweaker�112X

Egnater�4x12A/B

Tweaker�112X

Egnater�212X

Set�Impedance

Switch�to�16�ohms

Set�Impedance

switch�to�16�ohms

Set�Impedance

Switch�to�8�ohms

To�16�ohm

input�jack

To�8�ohm

mono�input

Set�impedance

switch�to�8�ohms

Always�set�the�impedance�switch�to�match�the�cabinet�impedance.�Here�is�some

handy�information.

To�determine�the�proper�setting�using�multiple�cabinets�of�the�same�impedance,

simply�take�the�impedance�of�one�cab�divided�by�the�number�of�cabinets.�For

example,�if�you�have�two�16�ohm�cabs,�simply�divide�16�by�2�for�a�total�load�of�8

ohms.

TWEAKER�HEAD�OR�112�COMBO

Always set the impedance switch to match the cabinet impedance. Here is some handy infor-

mation. To determine the proper setting using multiple cabinets of the same impedance, simply

take the impedance of one cab divided by the number of cabinets. For example, if you have

two 16 ohm cabs, simply divide 16 by 2 for a total load of 8 ohms.