Installation guide

→ Mutedelay

Here, you can set the waiting time between the activation of the mute line and the voice recognition. This is logical, as car radios

require various amounts of time to recognize a mute signal and the switchover of the audio channels in the radio. The time

should be set so that the ﬁrst announcement of the EGO „Main menu“ can be completely heard.

Possible statuses: 0.5 sec. / 1.0 sec. / 1.5 sec. / 2.0 sec. / 2.5 sec. / 3.0 sec.

→ Reset

Resets all audio settings to the default values.

Switch off

The current Bluetooth

connection is severed under this item and the EGO FLASH is switched off. The EGO FLASH may be switched

back on by pressing a single key.

7.5.3 iPod

Player

Symbol:

The iPod

player is activated via the main menu. The activation can only be performed if the accessory device „EGO iDapter“ was

also purchased. The iPod

player can also be activated if a mobile phone is not paired with the EGO Flash. To be able to play back

music from the iPod

an iPod

must be connected to the EGO iDapter cable.

Connection/pairing

The connection with the iPod

is automatically performed after the connection to the EGO iDapter cable. If the iPod

icon in the

main menu remains grayed out, the connection has failed and then you must reconnect the connector of the EGO iDapter cable to

the iPod

. After establishing a connection, music can immediately be played back from the iPod

. If the music is stopped, you can

search in the track lists under Options.

Charging the iPod

The iPod

is charged via the EGO iDapter. The iPod

charging can be manually switched off under Options in the „Settings“ menu

item in the iPod

player.

Playing

The following functions are available for playing and are shown in the display:

→ Play

→ Pause

→ Stop

EGO FLASH