Use and Care Guide

56V-VOLT LITHIUM-ION CORDLESS BACKPACK BLOWER — LB6000/LB6000-FC 15

ASSEMBLING THE BLOWER TUBES

WARNING:

To prevent accidental starting that could cause serious personal

injury, always remove the battery pack from the tool when assembling parts.

1. There are two tubes for the blower: a front tube and a middle tube (Fig. 3).

2. First attach the front tube onto the

middle tube. Grasp the ribs on the

tubes separately with your both

hands and align the horizontal groove

in the front tube with the knob on the

middle tube (Fig. 4).

3. Push the middle tube forward until

the knob engages either of the

vertical grooves. Then rotate the

middle tube in the direction of the

arrow until the knob slides into the

lock position in the vertical groove

(Fig. 5 & 6).

NOTICE: Before the middle tube is locked

into place during rotation, you will notice

a built-in stop that will create some

resistance. Continue to rotate the tube past

the stop until it slides fully into the lock

position, at which time the rib on the front

tube is exactly aligned with the one on the

middle tube.

Front Tube

Middle Tube

Aligned ribs

Lock positions

Vertical grooves

KnobRib

Horizontal groove Rib