Use and Care Guide

56-VOLT LITHIUM-ION CORDLESS MOWER — LM2020SP/LM2020SP-FC/LM2020/LM2020-FC 39
6. Replace the blade on the mower and tighten it securely (please see INSTALLING
THE BLADE).
WARNING:
An unbalanced blade will cause excessive vibration when rotating at
high speeds. It may cause damage to the mower and could break, causing personal injury.
LUBRICATION
Lubricate with light oil as directed below at least once each season.
◾
Periodically lubricate the spring and
pivot pin in the quick-adjust lever,
the torsion spring and pivot of the
rear-discharge door with light oil to
prevent rust (Fig. 31a & 31b).
◾
Place the mower into the locked
storage position:
1. Move the cutting-height
adjustment lever toward the
front and engage it in the lowest
setting (setting 1).
2. Open the handle-locking clamps
and fully recess the side rails to
the compact position.
3. Press and hold the quick-adjust
lever with your right hand to
release the handle.
4. Gently pivot the handle toward
the front of the mower; release
the quick-adjust lever and continue to pivot the handle until you hear and feel
the lock pin engage in the locked storage position.
31a
Spring
Pivot Pin
31b
Pivot
Torsion Spring