Use and Care Guide

56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2100SP/LM2100SP-FC/LM2100/LM2100-FC42
REPLACING THE WHEELS
(Fig. 33a, 33b, 33c & 33d)
WARNING:
Always remove
the battery pack when servicing or
transporting the mower.
1. Turn the mower on its side with the
upper surface against a wall.
2. Use a at blade screwdriver to pry
the dust cover away from the wheel.
3. Use an adjustable or 1/2 inch
(13mm) wrench to turn the bolt
counterclockwise to loosen it.
4. Remove the bolt, the worn wheel
and the wave washer from the
wheel axle.
Note: When replacing the rear wheel for
the self propelled mower (LM2100SP/
LM2100SP-FC), remove the drive gear
from the worn wheel and assemble to the
new wheel with the 3 screws.
33a
Dust Cover
Bolt
Round Recess
facing outside
Front Wheel
Wave Washer
Wheel Axle
Front wheel for LM2100SP/LM2100SP-FC/
LM2100/LM2100-FC
Rear wheel for LM2100SP/LM2100SP-FC
33c
Dust Cover
Bolt
Round Recess
facing outside
Rear Wheel
Wave Washer
Wheel Axle
Rear wheel for LM2100/LM2100-FC
33b
Dust Cover
Bolt
Round Recess
facing outside
Rear Wheel
Wave Washer
Drive Gear
Wheel Axle
Screw