Use and Care Manual

56-VOLT LITHIUM-ION CORDLESS 15" BRUSHLESS STRING TRIMMER 23

8. Place the ends of the line in two

opposite notches in the spool,

with approximately 6 in. (15 cm)

protruding (Fig. 18).

9. Align the notches of the spool from

which the lines protrude with the

eyelets in the spool retainer and

position the spool in the retainer

(Fig. 19).

10. Holding the spool and spool retainer, grasp one end of the line and pull it to

release the line from the notch in the eyelet (Fig. 20). Repeat with the other end.

6" (15 cm)

Eyelet

Notch