Use and Care Manual

ManualsBrandsEGO ManualsCordless String TrimmersReconditioned 15 in. 56V Lith-Ion Cordless Brushless String Trimmer-Split Shaft, Battery and Charger Not Included

56-VOLT LITHIUM-ION CORDLESS 15" BRUSHLESS STRING TRIMMER28

Install the new trimmer head

1. Position the ﬂange removed in step

5, above, onto the motor shaft with

the ﬂat surface facing away from the

base (Fig. 29).

2. Align the mounting hole in the spool

base with the motor shaft and mount

the base onto the shaft.

3. Wear gloves to hold the spool base

with one hand, and, with the other

hand, use a 1/2” (13mm) manual

socket wrench to turn the hexagon

nut clockwise to tighten it (Fig. 30).

4. Check to make sure that the washer

does not fall out of the base.

Fix the washer into the spool base as

shown below (Fig. 31).

30

Hexagon nut

31

Washer

29

Flat surface facing

away from the base