Use and Care Manual

56-VOLT LITHIUM-ION CORDLESS 15" BRUSHLESS STRING TRIMMER 23

7. Place the ends of the line in two

opposite notches in the spool,

with approximately 6 in. (15 cm)

protruding (Fig. 18).

8. Align the notches of the spool from

which the lines protrude with the

eyelets in the spool retainer and

position the spool in the retainer

(Fig. 19).

9. Hold the spool and spool retainer; grasp the line and pull it to release the line

from the notch in the eyelet (Fig. 20).

6" (15 cm)

Eyelet

Notch