Use and Care Manual

STRING TRIMMER ATTACHMENT—STA150026
8. Position the spring into the spool
base and press it in place
(see Fig. 16).
9. With one hand holding the spool
base, use the other hand to grasp
the new spool retainer and align
the tabs on the new spool retainer
with the holes in the spool base.
Use your palm to press and rotate
the new spool retainer left and right
until the tabs lock with the spool base (see Fig. 13 & 14).
10. If any parts of the spool retainer assembly are damaged or worn, replace the
damaged part and reassemble them as following showing (Fig. 26).
26
Spool Retainer Assembly
Slot Cover
Wire Holder
Screws
Location Housing
Head Housing