Use and Care Manual
56-VOLT LITHIUM-ION REAR-MOTOR 15" STRING TRIMMER — STX380016
MOUNTING AND ADJUSTING THE
LOOP HANDLE
1. Loosen and remove the locking pole
and wing nut from the loop handle
(Fig. 4).
2. Push the loop handle onto the
carbon-ber shaft between the
warning label and the threshold ring
(Fig. 5).
3. Insert the clamping block into the
handle slot (Fig. 6).
WARNING/AVERTISSEMENT/ADVERTENCI
A
To reduce the risk of injury to persons, do not operate without guards in place. Read operator’s
manual before using. Use Safety Glasses or Similar Eye Protection.
An de réduire les risques de blessure, n’utilisez pas l’article si les protecteurs ne sont pas en place. Lisez
le manuel d’utilisation avant d’utiliser l’appareil. Use lentes de seguridad o similares protección de los ojos.
Para reducir el riesgo de lesiones personales, no opere sin las protecciones en su lugar. Lea el manual del
5
6
4
Locking Pole
Loop Handle
Wing Nut
Clamping Block