Instruction manual

If there is a fire, immediately evacuate the premises and telephone

the fire brigade.

If the source of the alarm is not obvious go to the Ei450 i-controller and check

to see which indicator is illuminated, Fire or CO.

If the CO indicator is flashing, open doors & windows while evacuating the

premises. Telephone the appropriate authorities to report the incident.

If the fire indicator is lighting and there is no obvious fire, press

the button. The LOCATE segment will change from red to blue.

After a 10 to 40 seconds period, all the Alarms in the system will

stop sounding except the source Alarm(s).

When the alarm system sounds

Locate the source Alarm(s)

Fire / CO Alarm Controller