Instruction manual

If you are satisfied there is no fire but the Smoke/Heat Alarm is still
continuing to alarm you may now silence the system.
Wait until the SILENCE segment is flashing red and then press
the button. The SILENCE segment will turn blue, the Alarm(s) will
stop sounding and all segments on the controller will flash green
momentarily to indicate that the Controller is back in standby. The
Alarms in the system will be silenced for the next 10 minutes.
The fire memory feature enables the identification of a fire Alarm that
has previously been activated, e.g. one that false alarmed when the
house was not occupied.
1. After the Alarm deactivates, the Fire indicator will flash alternatively
with the MEMORY segment (red) for 2 minutes and then stop.
2. To recall the memory press the button, the MEMORY segment will
light blue and the source alarm will sound briefly and stop several
times.
3. To reactivate the memory feature press and hold the button briefly while the FIRE Icon is still flashing.
This reactivation can be repeated indefinitely. If the button is not pressed the memory recall will timeout
in 10 seconds.
15
Fire Memory
Fire / CO Alarm Controller
Fire / CO Alarm Controller
Fire / CO Alarm Controller
Fire / CO Alarm Controller