Instruction manual

Check the power up sequence

• Fire, Battery & CO icons flash

• Each individual segment lights up red

• Each individual segment lights blue

• Each individual segment lights green

• All lights are off to indicate standby mode

All RadioLINK devices, Smoke Alarms, CO Alarms, control switches,

etc. in the system must be put into house code. For instructions on how

to house code the Ei450 controller, see the “House Code” section of

this manual.

For instructions on house coding the other devices please refer to their

individual manuals.

Repeat this procedure for all Alarms and RadioLINK devices in the

system.

Fire / CO Alarm Controller

MODE

POWERH.CODE

OFFON