User Manual

10
Technical Data
Stirrer EHR 23 / 2.4 S
Rated voltage: 230 V ~ 110 V ~
Rated power input: 1800 W 1600 W
Rated current: 8,3 A 15.5 A
Frequency: 50 - 60 Hz
No Load Speed: I
II
440 rpm
970 rpm
450 rpm
1000 rpm
Load Speed: I
II
0 – 250 rpm
0 – 580 rpm
0 – 210 rpm
0 – 480 rpm
Max. basket diameter: 180 mm
Thread connection: M 14
Protection class: II
Degree of protection: IP 20
Net weight: about. 6,9 kg
Order number: 07755
Interference suppression: EN 55014 and EN 61000
Available accessories:
Item Order no.
Helicon Ribbon Stirring Rod WG 160 31227
Mortar Stirring Rod MG160 31327
Mortar Stirring Rod Stainless-Steel MGV 160 31427
Mortar Stirring Rod MG 180 31328
Disc Stirring Rod SG 150 31527
Mixing Paddle RPG 160 31437
… with M 14 thread connection
Supply
Stirrer with stirring rod and operating instructions in a set box
Application for Indented Purpose
The Stirrer EHR 23 / 2.4 S is designed for use in mixing material of high viscosity,
such as prefab mortar and plaster, cement, lime, concrete, quartz-filled epoxy
resins, screed, pastes, sealing compounds as well as gypsum and granulates in
batches up to 80 kg.
The diameter of the used stirring rods should not exceed 180 mm.