Installation & Assembly

ASSEMBLY INSTRUCTION
Eichholtz B.V. l Delfweg 52 l 2211 VN Noordwijkerhout l P.O. Box: 23, 2160 AA Lisse l The Netherlands l www.eichholtz.com
PARTS
1 2
SCREWS
CROSSBAR (A)
SCREWS
CROSSBAR (A)
ALLEN SCREWS
ALLEN KEY
EARTH WIRE
CROSSBAR (A)
LAMP
ALLEN SCREWS
106878 WALL LAMP beau site
Turn off the electricity supply at the main circuit panel befor installing. Do
not connect the electricity sypply until your luminaire is fully assembled
and installed.
Fix the crossbar (A) to the wall by using wall mounting plugs and screws
suitable to your wall type.
Connect the 3 power wires according to their colours. Brown is the live
wire, blue is the neutral wire, the green/yellow wire is the earthwire.
Place the lamp over the cross bar and fix it securely with the allen screws.
CARE INSTRUCTION
Wipe clean with soft, dry cloth.
Always avoid the use of harsh chemicals or abrasive cleaners as they may
cause damage to the fixture’s finish.