Installation & Assembly

Eichholtz B.V. l Delfweg 52 l 2211 VN Noordwijkerhout l P.O. Box: 23, 2160 AA Lisse l The Netherlands l www.eichholtz.com

ASSEMBLY INSTRUCTION

109133 CEILING LAMP KASBAH

Turn off the electricity supply at the main circuit panel

before installing. Do not connect the electricity supply

until your luminaire is fully assembled and installed.

Fix the ceiling bracket to the ceiling by using ceiling

mounting plugs and screws suitable to your ceiling.

Slide the base of the lamp over the ceiling

bracket and hold it in place.

Connect the 3 wires according to their colours. Brown

is the live wire, blue is the neutral wire, green/yellow

is the earth wire.

Screw the rod on the ceiling bracket and tighten it

until the base of the lamp is secure.

PAGE 1
ASSEMBLY INSTRUCTION 109133 CEILING LAMP KASBAH 1 Turn off the electricity supply at the main circuit panel before installing. Do not connect the electricity supply until your luminaire is fully assembled and installed. Fix the ceiling bracket to the ceiling by using ceiling mounting plugs and screws suitable to your ceiling. 2 Connect the 3 wires according to their colours. Brown is the live wire, blue is the neutral wire, green/yellow is the earth wire.
PAGE 2
109133 CEILING LAMP KASBAH 5 Place the bulbs in the lamp holders before installing the front cover. 6 Carefully slide the front cover over the rod. While holding the front cover in position, fix the knob on the mounting rod and tighten it firmly. ASSEMBLY INSTRUCTION Eichholtz B.V. l Delfweg 52 l 2211 VN Noordwijkerhout l P.O. Box: 23, 2160 AA Lisse l The Netherlands l www.eichholtz.