Installation guide

About ECMODULE 100
• ECMODULE STATS protocol: provides statistical information about the
protocol. Statistics on data transmission are generated from the traffic
streaming through the gateway PC and can help to determine the
performance of the transport medium.
X.25 Loadable Module Statistics
Port number: 01 Port name: P1
Sent Received Sent Received
Call request..: 1 0 Data packets......: 275 278
Confirm..: 0 1 Data segments.....: 275 296
Restart request..: 1 1 Characters........: 6616 4740
Confirm..: 0 0 Receiver Ready....: 18 152
Register request..: 0 0 Receiver Not Ready: 0 0
Confirm..: 0 0 Diagnostic packets: 0 0
Clear request..: 0 0 Unknown packets...: 0 0
Confirm..: 0 0 Rejects...........: 0 0
Reset request..: 0 0
Confirm..: 0 0
Interrupt request..: 0 0
Confirm..: 0 0
• ECMODULE TRACE protocol: lets you capture and examine the low-level
communications data streaming through the gateway PC. The trace function
can be an essential tool for the data communications expert.
X.25 Loadable Module Trace
Port number: 01 Port name: P1
X.25 Trace
Size = 2048 Length = 256 Block = 18 Mask = FF
BLK -HH:MM:SS:MSEC
1 -00:14:27.000 TX CALL REQ <10 04 0B> Data = 19
0A 55 40 03 46 22 00 CB 01 00 00 F0 F1 F3 F1 F9 ³.U@.F"..........³
F5 40 40 ³.@@ ³
2 -00:14:27.000 RX CLEAR IND <10 04 13> Data = 2
00 C5 ³.. ³
3 -00:14:27.000 TX CLEAR CNF <10 04 17> Data = 0
4 -00:14:27.020 TX CALL REQ <10 04 0B> Data = 19
0A 55 40 03 46 22 00 CB 01 00 00 F0 F1 F3 F1 F9 ³.U@.F"..........³
F5 40 40 ³.@@ ³
5 -00:14:27.020 RX CLEAR IND <10 04 13> Data = 2
00 C5 ³.. ³
6 -00:14:27.020 TX CLEAR CNF <10 04 17> Data = 0
7 -00:14:27.040 TX CALL REQ <10 04 0B> Data = 19
0A 55 40 03 46 22 00 CB 01 00 00 F0 F1 F3 F1 F9 ³.U@.F"..........³
F5 40 40 ³.@@ ³
8 -00:14:27.040 RX CLEAR IND <10 04 13> Data = 2
00 C5 ³.. ³
9 -00:14:27.040 TX CLEAR CNF <10 04 17> Data = 0
10 -00:14:27.055 TX CALL REQ <10 04 0B> Data = 19
0A 55 40 03 46 22 00 CB 01 00 00 F0 F1 F3 F1 F9 ³.U@.F"..........³
F5 40 40 ³.@@ ³
11 -00:14:27.055 RX CLEAR IND <10 04 13> Data = 2
00 C5 ³.. ³
12 -00:14:27.055 TX CLEAR CNF <10 04 17> Data = 0
13 -00:14:28.000 TX CALL REQ <10 04 0B> Data = 19
0A 55 40 03 46 22 00 CB 01 00 00 F0 F1 F3 F1 F9 ³.U@.F"..........³
F5 40 40 ³.@@ ³
14 -00:14:28.001 RX CLEAR IND <10 04 13> Data = 2
00 C5 ³.. ³
15 -00:14:28.001 TX CLEAR CNF <10 04 17> Data = 0
16 -00:14:28.015 TX CALL REQ <10 04 0B> Data = 19
0A 55 40 03 46 22 00 CB 01 00 00 F0 F1 F3 F1 F9 ³.U@.F"..........³
F5 40 40 ³.@@ ³
17 -00:14:28.015 RX CLEAR IND <10 04 13> Data = 2
00 C5 ³.. ³
18 -00:14:28.016 TX CLEAR CNF <10 04 17> Data = 0