Installation guide

SNA over Frame Relay Status 158
Tx buffer window size (K)
The size of the Frame Relay window for each
DLCI. This window is used for transmission buffer control.
Trace
Indicates whether this protocol is currently being traced using
ECMODULE TRACE.
Trace buffer size (bytes)
The size of the trace buffer.
Trace filter (hex)
The trace filter lets you tailor the trace to examine certain
groups of elements within the data stream. The trace filter is one byte long,
with each bit filtering a specific type of protocol element. When you filter an
element, you hide everything but that element. The trace filter is specified as a
two-digit hexadecimal number. For a more detailed description, see “Trace
Filter” on page 172.
Trace entry size (bytes)
This configures Trace to examine only the first
n bytes of each frame or packet traced. If you have a Trace Entry Size of 32
bytes, only the first 32 bytes of each frame or packet is loaded into the trace
buffer.
DLCI
The Data Link Connection ID. Identifies a particular logical link in the
Frame Relay network.
Management Protocol State
The DLCI state.
Value Description
Active The Management Protocol State is active.
Inactive The Management Protocol State is not active.