Installation guide

SNA over Frame Relay Statistics 159
SNA over Frame Relay Statistics
When you issue the command ECMODULE STATS SNAFR from the gateway
PC with an active SNA over Frame Relay connection, global statistical
information about the protocol is displayed.
The following command displays global statistics of the Frame Relay
connections on the specified Eiconcard port.
ECMODULE STATS SNAFR /P 1
Frame Relay Loadable Module Statistics
Port number: 01 Port name: FRELAY01
Link up....................: 1 Link down....................: 0
Link errors................: 0 Expired T1 timer.............: 35
Parse error................: 0
Status Enquiry Message
Full status sent...........: 6
Sequence # exchange only...: 29
Unexpected Status Enquiry Response Message
Full status received.......: 0
Sequence # exchange only...: 0
Sent Received
Frames.....................: 0 2599
bytes......................: 0 332672
Sequence #0................: 1 0
You may also obtain detailed statistical information on a particular DLCI
station by issuing the following command:
ECMODULE STATS SNAFR /P 1 /C16
Frame Relay Loadable Module Statistics
Port number: 01 Port name: FRELAY01
Port number................: 0
DLCI.......................: 16
DLCI up....................: 1 DLCI down....................: 0
Backward congestion........: 0 Forward congestion...........: 0
Sent Received
Frames.....................: 0 1300
bytes......................: 0 166400
Global Statistics Fields
Port number
Number of the Eiconcard port being monitored.
Port name
The name of the Eiconcard port being monitored.
Link up
Number of times the link went up.
Command
ECMODULE STATS SNAFR [/Port p | portname] [/Connection n]