User's Guide Network Device DIVA T/A ISDN

DIVA T/A ISDN Modem User’s Guide
◆
Page 25
Macintosh (System 7 or Later) Installation
and Setup
To properly set up the DIVA T/A with a Macintosh system (System 7 or later), you must
connect the cables, then install the DIVA Terminal Adapters software. You can then use the
Configuration Assistant to set your ISDN parameters.
Step 1: Connect the Cables to your DIVAT/A
Following the steps outlined on page 7
.
Step 2: Install the DIVA Terminal Adapters Software
The installation program copies all necessary files on your system. These include the DIVA T/A
on-line documentation and the DIVA Terminal Adapters Program.
Follow the steps outlined on page 26
.
Step 3: Specify your ISDN Settings via the Configuration Assistant
The Configuration Assistant helps you configure your DIVA T/A ISDN Modem to work with
your ISDN network connection. Later you may re-run the Assistant or make changes
manually using the Configuration Tool.
Follow the steps outlined on page 28
.