User's Guide Network Device DIVA T/A ISDN

DIVA T/A ISDN Modem User’s Guide
◆
Page 35
The DIVA Terminal Adapters Program for Windows 95/98/NT
The Profiles Window
The Profiles window allows you to edit any of the three profiles using the Configuration Tool
or Configuration Wizard. You can also rename profiles or set the active profile.
To open the Profiles window:
1
Double-click the
T/A
icon on the taskbar to start the Terminal Adapters program, or click
‘Start’, ‘Programs’, ‘Eicon DIVA T-A ISDN Modem’, ‘Eicon DIVA Terminal Adapters’.
2
Right-click on the device icon and choose ‘Configure Profiles’. You can also select the
device icon and choose ‘Configure Profiles’ from the ‘File’ menu.
The ‘Profiles’ window opens.
If you want to... Then do this
Configure a profile
manually
Select a profile from the ‘Profiles’ list in the center of the window, then
click the ‘Configure’ button (see page 37
).
Configure a profile
using the Wizard
Select a profile from the ‘Profiles’ list in the center of the window, then
click the ‘Wizard’ button (see page 54
).
Rename a profile Select a profile from the ‘Profiles’ list in the center of the window, then
click the ‘Rename’ button.
Set the active profile Select a profile from the ‘Active Profile’ list at the bottom of the window,
then click ‘OK’.
The active profile is the profile the DIVA T/A uses when powering up. The
Configuration Tool also opens the active profile when you double-click
on the device icon, as does the Wizard when you run it from the File
menu.