User's Guide Network Device DIVA T/A ISDN

DIVA T/A ISDN Modem User’s Guide
◆
Page 8
Connecting the Cables to the DIVAT/A
After Connecting the Cables
After connecting the power and the ISDN cable to the DIVA T/A, wait at least 10 seconds for
the DIVA T/A to initialize and then check the ‘D’ and ‘Link’ LEDs. If they are both glowing
continuously, then your DIVA T/A is operational from a previous configuration. If not, you will
have to provide information on your ISDN setup using the DIVA Terminal Adapters software,
which you will install next. See below.
What’s Next?
The installation procedure you need to follow depends on the operating system you are
using. Go to the page corresponding to your platform and continue.
•
Windows 95/98/NT Installation and Setup...............................................9
•
Macintosh (System 7 or Later) Installation and Setup..........................25
•
Setup for Other Operating Systems............................................................31