Installation guide

Installation in Unattended Mode 109
The syntax for starting the setup is:
Description of the parameters:
Instance names of Diva Server adapters
The Diva Server adapters are identified by the option InstanceName. The following
instance names are available:
%WINDIR%\SYSTEM32\SETUP.EXE /f
/t NTN_InstallMode = install
/t NTN_Origination = ncpa
/I "ncpashel.inf"
/v
/t NTN_InfName = %WINDIR%\SYSTEM32\<InfName>
/t NTN_InfOption = <InstanceName>
/t NTN_SRCPATH = <InstallPath>
/t STF_GUI_UNATTENDED = "YES"
/t STF_UNATTENDED = <InstallPath>\<OptionsFile>
/t STF_UNATTENDED_SECTION = <InstanceName>
Parameter Description
<Infname> This is the variable for the file OEMNAD<xx>.INF which has been copied
to the %WINDIR%\SYSTEM32 directory during preparation of the setup
(see Preparing the script file
or set inffile above).
<InstanceName> This is the variable for either the name of the Diva Server adapter to be
installed or the interface name if multiple adapters are installed. See
Instance names of Diva Server adapters
on page 109 or Instance names
of interfaces on page 110 for valid instance names.
<InstallPath> This is the variable for the source path where the original OEMSETUP.INF
resides. (The path to the special drive or CD-ROM to which you copied the
Diva Server for Windows NT files. See Preparing the files
on page 86, step
1.)
<OptionsFile> This is the variable for the options file which contains the information on
what is to be installed and the specific parameters (see Options file
on
page 87). You may also use the options file example ANSWER.TXT supplied
with the Diva Server for Windows NT installation files and edit the file
according to your requirements.
Instance Name Adapter
DSBRI Eicon Diva Server BRI-2M (ISA and PCI, see BusType
on
page 89)
DSBRI_2 Eicon Diva Server BRI-2M 2.0
DS2FX Eicon Diva Server 2FX
DSBRI_2_VOICE Eicon Diva Server Voice BRI-2M 2.0