Installation guide

Eicon Port driver 43
If multiple Diva Server adapters are installed, assign each adapter to every
communications port to which it needs access. Each port will use one B-channel on the
assigned adapter. This means for example that one Diva Server BRI-2M adapter can be
used by two ports and one Diva Server 4BRI-8M adapter can be used by eight ports.
When installing the Port driver, the ports are set up automatically according to the type
and number of currently installed adapters.
Assigning the first port
During installation of Diva Server for Windows NT, the ISDN ports are automatically
assigned to the installed serial ports starting from the first installed serial port counting
consecutively upwards.
If you want to assign other serial ports to the Port driver, select a new port, e.g. COM 9,
as ‘First port’ on the port list page of the ‘Eicon Port Driver Setup’ dialog box.
Configuring ports
The buttons ‘Add’ and ‘Delete’ can be used to add and delete ports as desired.
1. To change a port, select the port to be changed in the ‘Eicon Port Driver Setup’ dialog
box.
2. Click ‘Change’.
3. In the ‘Change Port’ dialog box, select the adapter that is to be assigned to the port.
Click ‘OK’.
4. You can also leave a port unassigned so that the port number is reserved for
subsequent configurations (see the illustration below).