Installation guide

About This Online Guide 5
CHAPTER 1
About This Online Guide
How to use this online guide
• To view a section, click the corresponding bookmark located on the left.
• To view a topic that contains further information, click the corresponding blue underlined
phrase.
• You may wish to print out the pages required for installing the drivers.
Structure of this guide
This guide provides a detailed description of how to install and configure Diva Server for
Windows NT, and how to troubleshoot your ISDN connection.
This guide is structured as follows:
Section Contents
About Diva Server for Windows NT Diva Server for Windows NT features, supported hardware,
and requirements for software installation.
Discussion of how the Diva Server for Windows NT software
interacts with your Eicon Diva Server adapter.
Installation and Configuration
Automatic installation process. Installation and
configuration of the basic drivers, the WAN-Miniport driver,
Remote Access Service, the Eicon Port driver (COM port),
and CAPI 2.0.
Installing Additional Components
Installation of virtual modems which are to use the Eicon
Port driver (COM port) and installation of the Diva Server
Telephony Service Provider.
Using Dial-Up Networking or RAS
Administration
RAS client or RAS server setup.
Using Shorthold Mode Information on the shorthold feature.
Using Security Dynamics
Authentication
Information on the Security Dynamics Authentication
feature.
Changing Your Installation
New Diva Server adapter, changing configuration data,
software update, uninstalling.
Installation in Unattended Mode
Installation of Diva Server for Windows NT without user
input.