Installation guide
Using Dial-Up Networking or RAS Administration 66
3. The name of the telephone book entry that is to be dialed may be entered in the ‘New
Telephone Book Entries Wizard’ dialog box.
Note: If you click ‘No Additional Information Required’, the ‘Edit Telephone Book
Entry’ dialog box appears. All settings can be made here, but no explanations are
available. The dialog box for setting up the RAS client explained below is no longer
visible.
4. Click ‘Next’.
5. If only RAS is required, click ‘Next’ in the ‘Server’ dialog box.
Note: See the Windows NT RAS documentation for additional settings.
6. If more than one port for outgoing calls has been configured, you must specify the
port through which the call is to be made:
7. Specify the port, e.g. ‘DIWAN (ISDN1)’ to dedicate a line to this outgoing connection.
The effect of the setting ‘All available ISDN lines multi-linked’ is that RAS will
automatically establish a connection over all lines.
Click ‘Next’.
Note: Note that a larger number of active lines may increase telephone
charges. With a normal S
0
interface, a connection with the setting ‘All
available ISDN lines multi-linked’ would be established over both
B-channels.