Installation guide

About Diva Server for Windows NT 7
CHAPTER 2
About Diva Server for Windows NT
Diva Server for Windows NT enables you to use your Eicon Diva Server adapter with
Windows NT 4.0. Diva Server for Windows NT provides modem emulation, connectivity
via the Windows NT Remote Access Service (RAS) over ISDN, a CAPI interface for
ISDN-based applications, and a TAPI interface for telephony-based applications.
Features
General features
The list below provides an overview of the features supported by Diva Server for
Windows NT.
• Connection of Windows NT servers and clients over ISDN or channelized T1
• Support for ISDN basic-rate interface, ISDN primary-rate interface, and channelized
T1 interface
• Automatic detection of Eicon Diva Server adapter during installation
• Connection to ISDN routers, enabling access to a remote LAN or the Internet
• Support for ISDN lines with a transfer rate of 64 kbps or 56 kbps (e.g. USA)
• Support for channelized T1 lines with a transfer rate of 56 kbps (see Channelized T1
(RBS) features on page 9)
• Support for fractional lines
• Network access for Windows NT, Windows 95/98, Windows for Workgroups 3.11, DOS,
and OS/2-Clients
• Connection to a Windows NT server from digital, analog, and mobile networks with
only one telephone number
• Automatic protocol detection
• Synchronous/asynchronous conversion
• Support for LAN protocols: TCP/IP, IPX/SPX, NetBIOS, NetBEUI, LAN Manager API
• Support for B-channel protocols: HDLC, X.75, X.25, V.120, V.110, PIAFS 1.0 and 2.1,
modem V.34+ and V.90, fax connections, V.42/LAPM (error correction), and V.42bis
compression (see Features
on page 124)
• Up to 120 B-channels with an ISDN primary-rate interface or up to 96 channels with a
channelized T1 line