User's Manual

60
Maintenance and Cleaning
Cleaning the Projector Cabinet
Cleaning the Projection Lens
UnplugtheACpowercordbeforecleaning.
Gently wipe the projection lens with a cleaning cloth that
contains a small amount of non-abrasive camera lens
cleaner, or use a lens cleaning paper or commercially
availableairblowertocleanthelens.
Avoid using an excessive amount of cleaner.Abrasive
cleaners, solvents, or other harsh chemicals might scratch
thesurfaceofthelens.
UnplugtheACpowercordbeforecleaning.
Gentlywipetheprojectorbodywithasoftdrycleaningcloth.
When the cabinet is heavily soiled, use a small amount of
milddetergentandfinishwithasoftdrycleaningcloth.Avoid
using an excessive amount of cleaner.Abrasivecleaners,
solvents,orotherharshchemicalsmightscratchthesurface
ofthecabinet.
When the projector is not in use, put the projector in
an appropriate carrying case to protect it fromdust and
scratches.
Whenmoving thisprojector orwhile notusing itover an
extendedperiodoftime,replacethelenscap.
Attachthelenscapaccordingtothefollowingprocedures.
Attaching the Lens Cap
1
2
Threadthestringthroughtheholeonthelenscapand
thentieaknotinthestringtosecureitinplace.
Topasstheotherendofthestringintotheholeonthe
bottomoftheprojectorandpullatit.
Donotuseanyflammablesolventsorairspraysonthe
projector and in its vicinity. The explosion or fire hazard
may occur even after the AC power cord is unplugged
becausethetemperatureinsidetheprojectorisextremely
highduetothelamps.Inaddition,thereisariskthatthe
internalpartsmaybedamagednotonlybytheflammable
airspraybutalsobythecoldair.
CAUTION