Instruction manual

1
COMPUTER INPUT-1 TERMINAL (ANALOG HDB
15-PIN)
Used to connect a computer to the projector.
8
CONTROL PORT-1 CONNECTOR
Used to connect a mouse cable to the projector.
2
COMPUTER INPUT-1 TERMINAL (DIGITAL MDR
20-PIN)
Used to connect a computer to the projector.
9
CONTROL PORT-2 CONNECTOR
Used to connect a mouse cable to the projector
3
COMPUTER INPUT-2 JACKS (BNC TYPE x 5)
Used to connect a computer to the projector.
10
USB PORT-i CONNECTOR
Used to connect a computer to the projector.
4
MONITOR OUTPUT TERMINAL (ANALOG HDB 15-
PIN)
Used to connect a monitor to the projector.
11
USB PORT-2 CONNECTOR
Used to connect a computer to the projector.
5
COMPUTER AUDIO INPUT-i JACKS (R and L)
Used to connect an audio output from the computer
to the projector.
12
SERIAL PORT TERMINAL (DB9)
Used to connect a computer to the projector.
6
COMPUTER AUDIO INPUT-2 JACKS (R and L)
Used to connect an audio output from the computer
to the projector.
13
WIRED REMOTE JACK
When using the wired remote control, connect the
remote cable to this jack.
7
AUDIO MONITOR OUTPUT JACKS (R and L)
Used to connect an audio input from audio equipment
to the projector.