Owner`s manual

20

Note:
● When the logo select is set to be "Off", the
logo will not be displayed on the screen.
● When the Display function is set to be "Off”,
the logo and countdown will not be displayed
on the screen.
● During the countdown period, all operations
are invalid except shutdown.
1. Complete peripheral connections (with a
computer, HD Recorder, etc.) before turning
on the projector.
2. Connect the projector’s AC power cord into
AC outlet. The POWER indicator turns red.
3. Press the POWER button on top control or
on the remote control. The POWER indicator
becomes green and the cooling fans start to
work. The preparation display appears on the
screen.
4. If the projector is locked with a PIN code, a
PIN code input dialog box appears. Enter the
PIN code as instructed below.
Caution on handling the PIN code
What is PIN code?
PIN (Personal Identification Number) code is a
security code that allows the person who knows
it to operate the projector. Setting the PIN code
can prevent unauthorized use of the projector.
A PIN code consists of a three-digit number.
Refer to the PIN code lock function in the
"Expand" "Security" menu on page 44 for PIN
code lock operation of the projector.
Move the cursor to OK, and press OK.
----- Input PIN code Exit
PIN Code
Set Cancel
Move Select Reset
PIN Code
Set Cancel
*
Basic operation
Turn on the projector
Enter a PIN code
Press OK button to input PIN code. Press

button to select a number and press OK button
to enter it to the PIN code box, then number
changes to "*" and automatically move the
cursor to next box. If you fixed an incorrect
number, press MENU button to reset it again.
Repeat the step to complete entering a three-
digit number.
After entering the three-digit number, will
automatically move the cursor to “Set”, press
OK button so that you can start to operate the
projector.
If you entered an incorrect PIN code, the “PIN
code” and the number (***) turn red. PIN code
will be reset within one second automatically,
Enter the correct PIN code all over again.
If you forget your PIN code, the
projector can not longer be started.
Take a special care in setting a new
PIN code. Write down the number in
a column on page 65 of this manual
and keep it properly. Should the PIN
code be missing or forgotten, consult
your dealer or service center.