Owner`s manual

23
Menu bar
①
PC adjust
Adjust computer parameters to match with VGA input signal format: Auto PC adj, Fine sync,
Total dots, Horizontal, Vertical, Display area H, Display area V.
②
Display
- Screen Size: select the projecting image screen size.
If a computer is selected as a signal source, the following setup options for the image size are
available: Normal, Wide, Custom.
If video equipment is selected as a signal source, the following setup options for the image
size are available: Normal,Wide or Custom.
- Keystone: select keystone function to correct image keystone distortion.
- Project Mode: select a project mode among Front, Rear, Ceiling/Front and Ceiling/Rear.
- Menu Position: set the menu's position on the screen.
- Background Display: set the background display color for project screen.
- System: select a system signal format to match the input source.
③
Color adjust
- Image mode:the available image modes is Normal, Natural, Cinema, Blackboard (green),
Colorboard or User Image.
- Image color adjust:
If a computer is selected as a signal source, the following image adjusting options are
available: Contrast, Brightness, Color temp., White balance (R/G/B) and Sharpness.
If video equipment is selected as a signal source, the following image adjusting options are
available: Contrast, Brightness, Color, Tint, White balance (R/G/B), Sharpness and
Progressive.
④
Setting
Congure basic operation settings of the projector: On start, Standby mode, High land,
Lamp control, Cooling fast, Closed caption, Key lock, Iris, Terminal and Sound.
⑤
Expand
Congure expand operation settings of the projector: Language, Auto setup, Logo, Security,
Power management, Filter counter, Pattern, Network, Factory default and Lamp counter
reset.
⑥
Info.
Display the system information of the projector.
Main menu
Sub menu
PC adjust
Display
Color adjust
Setting
Expand
Info.
Move Next Exit
Auto PC adj.
Fine sync 16
Total dots 1056
Horizontal 216
Vertical 27
Display area H 800
Display area V 600
Reset
Mode free
Store
①
②
③
④
⑤
⑥
Basic operation