Owner`s manual

28
Input select
Direct Operation
Press HDMI, VGA, COMOPNENT, S-VIDEO
or VIDEO button to select HDMI, VGA IN,
Component, S-video or Video as input source.

Note:
- When the Input Search function is set to On in the Auto setup function, the input signal will be
searched automatically.
- When VGA IN 2/VGA OUT terminal is used as VGA OUT, VGA IN 2 can not be selected.
Menu operation
1 Press MENU button on the remote control or
top control to display the input select menu.
2 Press

button to select HDMI,VGA IN,
Component, S-video or Video , then press
OK button.
Input select menu
Remote control
When input source is from
computer connected to VGA IN
2/VGA OUT terminal with VGA
cable, please select VGA IN 2.
VGA IN 2
INPUT
VIDEO
HDMI
COMPONENT
VGA
S-VIDEO
HDMI
VGA IN 1
VGA IN 2
Component
S-video
Video

When input source is from
equipment connected to HDMI
terminal with HDMI cable,
please select HDMI.
HDMI
Component
Select it when the input source
is from the video equipment
connected to COMPONENT
terminal with a RCA cable.
When input source is from
computer connected to VGA
IN 1 terminal with VGA cable,
please select VGA IN 1.
VGA IN 1
Select it when the video input
signal is connected to S-VIDEO
terminal.
S-video
Select it when the video input
signal is connected to VIDEO
IN terminal.
Video
Control panel
INPUT