Owner`s manual

34
System
Computer system select
The projector automatically tunes to various types of computers with its function of Multi-scan system
and Auto PC Adjustment. If a computer is selected as a signal source, the projector automatically
detects the signal format and tunes to project proper images without any additional setting.
PC adjust
Display
Color adjust
Setting
Expand
Info.
Move Next Exit
Screen Size Normal
Keystone Stored
Project Mode Front
Menu Position Center
Background Display Blue
System 1024x768@60

Note:
When HDMI is selected, System menu for computer is disable.
PC adjust
Display
Color adjust
Setting
Expand
Info.
Adjust Select Back
System RGB(PC1)
1024x768@60
1366x768@60
----
----
----

System for computer signal
System
Display
One of the following messages may appear when:
Auto
-----
When the projector cannot recognize
the connected signal conforming to
the provided computer system, Auto
is displayed on the System menu box
and the Auto PC Adj. function works
to display proper images. If the image
is not projected properly, a manual
adjustment is required.
There is no signal input from
computer. Check the connection
between your computer and projector.
Select computer system manually
The system can also be selected manually.
1 Press MENU button on the remote control to
display the screen menu.Press

button to
select the Display icon, and press OK button.
2 Press

button to select System and press
OK button.
3 Press

button to select your required
system, and then press the OK button.