Owner`s manual

43
Expand
The projector has Expand menu that allows you to set the other various expand functions
described as follows.
Expand menu
Auto setup
PC adjust
Display
Color adjust
Setting
Expand
Info.
Move Next Exit
Language
Auto setup
Logo
Security
Power management
Filter counter
Test pattern
Network
Factory default
Lamp counter reset
PC adjust
Display
Color adjust
Setting
Expand
Info.
Move Next Back
Auto setup
Input search On
Auto PC adj. On
Auto keystone Auto
Language
Press

button to select the language for
screen manual.
This projector provides languages below:
English, French, Spanish, Portuguese,
German, Italian, Japanese, Korean, Russian,
Finnish, Dutch, Thai, Vietnamese, Turkish,
Afrikaans, Indonesian, Persian, Arabic,
Traditional Chinese,Simplied Chinese.
Auto setup
Press AUTO button on the remote control
to execute Input search and Auto PC adj.
functions.
Input search
Allows you to automatically detect input signals.
It stops when a signal is found. Press

button
to select an option below:
Off........Disabled.
On........ Enabled. This function is used to
detect input signals automatically
and stops when nding a signal.
Auto PC adj.
On........ Press the AUTO button on the
remote control to enable Auto PC
adj. function automatically.
Off........Cancel Auto PC adj. function.
Auto keystone
Off.........Disable auto keystone function.
Manual.. Press the AUTO button on the top
control or remote control to enable
Auto keystone function.
Auto...... Correct keystone distortion
according
to the slope of the projector.

Note:
- Only the last selected input source can be
detected.
- If the INPUT button on the top control or on the
remote control is pressed during Input search is in
progress, Input search will stop and go back to the
previous input signal.
- Fine sync., Total dots, Horizontal and Vertical
position of some computers cannot be fully
adjusted with the Auto PC Adj. function.
When the image is not provided properly with this
operation, manual adjustments are required.
1 Press MENU button on the remote control to
display screen menu. Press

button to
select Expand, then press OK button.
2 Press

button to select the item you
want to set, press OK button.
3 Press

button to adjust the item, then
press OK button.