Owner`s manual

48
Expand
Factory default
This function returns all setting values except
for the User logo, PIN code lock, Logo PIN
code lock, Lamp counter and Filter counter to
the factory default settings.
Network setting
DHCP Off
Set Cancel
IP address 0 0 0 0
Subnet 0 0 0 0
Gateway 0 0 0 0
DNS 0 0 0 0
Move Select Back
Network setting
DHCP On
Set Cancel
IP address
Subnet
Gateway
DNS
Adjust Select Back
(3) When DHCP is set On, IP address,
Subnet, Gateway and DNS will be
obtained automatically, press OK at "Set"
to conrm the parameters.
When DHCP is set Off, press button
to enter IP address, then press button
to enter Subnet, Gateway and DNS
respectively, press OK at "Set" to conrm
the parameters.
Factory default
PC adjust
Display
Color adjust
Setting
Expand
Info.
Move Next Exit
Language
Auto setup
Logo
Security
Power management
Filter counter
Test pattern
Network
Factory default
Lamp counter reset
Yes
Move Select Back
No
Yes
Yes
OK?
Move Select Back
No
Return to Factory default?
Return to Factory default?
This function is used to display the cumulative
lamp operating time and reset the lamp
counter.
When the total lighting time of a lamp exceeds
the recommended total hours of use, the Lamp
replacement icon (page 57) will appear on the
screen, indicating that the end of lamp life is
reached.
When replacing the projection lamp, reset lamp
counter. See "Lamp Counter Reset" on page
58.
Lamp counter..........The time that lamp used.
Lamp counter reset..Reset the Lamp counter.
Lamp counter reset