Owner`s manual
42
Chapter 4 Controlling the Projector
Item Description
Filter control ....... Scroll the filter. Click "Roll-up", a confir-
mation display appears, and then click
"OK", the filter will be scrolled.
Fan speed control
... Sets the running speed for the cooling
fans. (Normal, Max)
Remote control
.... Selects the remote control code.
(Code1 - Code8)
Power management
... Sets into the selected power manage-
ment mode (OFF, Ready, Shutdown) if
the input signal is interrupted and no
control key is pressed for the specified
period of time.
* The specified time can be set 1 to 30 min.
Direct on ................ Sets the power-on mode when the AC cord is connected to the outlet.
PJ lock suspend
... When the projector has a security of PIN code lock, disable this function temporarily
by pressing Execute button.
Setting procedure
1. Turn off the projector , disconnect AC cord from the outlet and then connect AC cord again.
2. Access this page with the web browser.
3. Click Execute button on the PJ lock suspend.
Shutter .................... Sets the shutter operation. (ON: close, OFF: open)
Shutter management
... Sets the specified period of time when the projector shuts down after the projector
is left with the shutter closed.
* The specified time can be set 5 to 480 min.
Item Description
Input button ....... Sets the input search mode by pressing
the INPUT button of the projector and
the remote control. (Mode1, Mode2,
Mode3)
Display .................... Switches on or off the on-screen menu
display on the screen. (ON, Countdown
off, OFF)
Countdown off ....... Displays input image instead the
countdown during the startup.
Background ......... Sets the screen background when no
signal input. (Blue, User, Black)
Logo ......................... Sets on or off the logo display on the
screen during the startup. (User, Default, OFF)
Picture in Picture
... Sets the Picture in Picture mode. (OFF, User1 - User5)
HDMI setup ......... Sets the input signal from HDMI input.
Image ............. Sets the Digital RGB image level of HDMI. (Normal, Enhanced)
Sound ............. Sets the audio input when using HDMI. (HDMI, AUDIO1)
Lamp control ...... Selects lamp control mode. (Auto, Normal, Eco1, Eco2)
Lamp life control
... Selects lamp life control mode (Mode1, Mode2) when the total use time exceeds
the recommended total hours of use.
Setting 1
Setting 2