Owner`s manual

19
Remote Control
Remote Control Batteries
Installation
1. Remove the battery cover.
2. Load the batteries.
Make sure the poles are correctly oriented.
3. Close the battery cover.
Caution
►Avoidexcessiveheatandhumidity.
►Donotdroptheremotecontrol.
►Iftheremotecontrolwillnotbeusedforanextendedperiod,removethebatteries.
►Donotexposetheremotecontroltowaterormoisture.Thiscouldresultinmalfunction.
►Replacethebatterywhenremotecontroloperationbecomessluggishorunresponsive.
►Donotplacetheremotecontrolclosetotheexhaustventilationopeningoftheprojector,
because the exhaust air is hot.
►Donotusebatteriesofdifferenttypesatthesametime.
►Donotmixanewbatterywithusedone.Makesuretheplusandnegativeterminalsare
correctly aligned when loading batteries.
►Disposeofbatteriesinaccordancewithenvironmentallawsofyourarea.
►Donotdisassembletheremotecontrol.Iftheremotecontrolneedsservice,pleasecontact
your dealer.