Owner`s manual

Maintenance Of Projector

Maintenance of Projector

Filter

Keeptheairlterscleanbycleaningthemperiodically.

By using Filter Counter the projector can remind you of the timing.

Thereare2typesofairltersinthisprojector,oneisblackspongeattachedjustback

sideoftheltercoverandtheotheristhelterassemblycalledAnti-dustlter(consists

of a white folded cloth and black frame).

How to clean or replace the lters

Turn off the projector, and unplug the power cord. Wait to allow the projector to cool

downsufciently.

1. Push up 2 white stoppers of the Filter cover and remove it from the side of projector

as shown below.

2. RemovetheAnti-dustlterfromtheFiltercoverbypushingandslidingitasshown

below.(Thereis>ABS<signonthetoptheblackframeoftheAnti-dustlter.)

3. Cleanthelterswithavacuumcleanerexceptforthebacksideofthesponge,

because the vacuum cleaner may suck it. Brush the sponge gently by a brush.

(Donotcleanthelterswithwater.)

*IftheAnti-dustlteristoodirtytoclean,pleasereplaceitwithnewone.

ThepartnumberoftheAnti-dustlteris"13340233".

>ABS<

Spongelter