Owner`s manual

52
Maintenance of Projector
6
4.InstalltheAnti-dustltertotheltercover.
(a)PlacetheFiltercoversoasthespongelterfacesyou.
(There is >PC< sign on the top middle of the Filter cover.)
(b)PlacetheAnti-dustlteronitsoasthe4whitehooksshowupthroughthe
openings in the corners.
(There is >ABS< sign on the top of the black frame.)
(c)SlidedowntheAnti-dustltersothatthetwoblackhooksoftheAnti-dustltergo
into the slots on the bottom of the Filter cover.
(you shall hear a "click" sound)
Make sure that all of 4 white hooks of the Filter cover are well hooked on the
frame.
5.InserttheprojectedpartsoftheFiltercovertothesideoftheprojectorrstandthen
close the Filter cover by pushing 2 white stoppers. Make sure that the Filter cover is
well closed.
6. Reset the Filter Timer.(P.34)