Owner`s manual

Maintenance of Projector

Lamp

Please turn off the projector and unplug the AC power cord. And then, let the projector

cool down at least 60 minutes.

Replacing New Lamp(Part Number:23040021)

1. Remove the lamp door.

2. Loosen 2 screws of the lamp holder. Hold the handle on the top of the lamp, pull out

the lamp straight off the projector.

3.Insertnewlamp,lockthelampdoorrmlywith2screws.

4. Put the lamp door on.

5. Please reset the lamp timer after replacing lamp. (P.32)

Whenchanginglamp,itisrecommendedthatyouchangetheleratthesametime.