MEGO_User_Doc_V1

EVO-IN-MOTION TECHNOLOGY LTD.
5 Advanced Applications
People with adequate knowledge and
practices in electronics may also explore more
advanced tricks with MEGOs. Be aware that
implementation of some applications require
two MEGOs.
Generate Negative Voltage
Some integrated circuits such as Opamps may
require dual voltage supply for powering up,
which means that you need to have both
positive and negative voltage. A dual voltage
supply setup can be achieved with two MEGOs
by using the setup as shown below.
Larger Output Current
Some devices require higher electrical power
while operating, such as DC motors, LED
arrays, transmitters, speakers… Since each
MEGO is recommended to operate under 5W,
if you want to drive electronics with higher
power consumption, a simple way is to set
multiple MEGOs in parallel mode as shown
below, to enhance current supply capability.
Measure DC Voltage
MEGO can be also used to measure DC voltage.
Before you do that, keep in mind that MEGO
CANNOT source and measure simultaneously.
You can measure a DC voltage (within 3-30V
range) using the USB to alligator clip, but
make sure you TURN OFF the device first.
Contact
Website: www.eimtechnology.com
Email (general): [e-mail]
Email (technical): [e-mail]
Inventory: 112-1090 Cliveden Ave, Delta, BC