Reference Manual

Hardware Reference Manual
Version 1.0 - 72 - eInfochips Confidential
The host product shall be properly labelled to identify the modules within the host product.
The ISED certification label of a module shall be clearly visible at all times when installed in the host
product; otherwise, the host product must be labelled to display the ISED certification number for the
module, preceded by the word "contains" or similar wording expressing the same meaning, as follows:
Contains IC: XXXXXX-YYYYYYYYYYY
In this case, XXXXXX-YYYYYYYYYYY is the module's certification number.
Le produit hôte devra être correctement étiqueté, de façon à permettre l'identification des modules qui
s'y trouvent.
L'étiquette d'homologation d'un module d'ISDE devra être apposée sur le produit hôte à un endroit
bien en vue, en tout temps. En l'absence d'étiquette, le produit hôte doit porter une étiquette sur
laquelle figure le numéro d'homologation du module d'ISDE, précédé du mot « contient », ou d'une
formulation similaire allant dans le même sens et qui va comme suit :
Contient IC : XXXXXX-YYYYYYYYYYY
Dans ce cas, XXXXXX-YYYYYYYYYYY est le numéro d'homologation du module.
RF exposure
Information
This device has been designed and manufactured to comply with the limits for exposure to RF energy
set by the Federal Communications Commission (FCC) of the United States, Industry Canada (IC) and
the European Union and other countries.
This product is of a fixed type, and the distance from the human body during normal use is >20CM,
FCC RF exposure limit is 1 mW/cm
2
, IC RF exposure limit is 2.68W. The highest reported RF exposure
value to FCC 0.01762 mW/cm2 ,The highest reported RF exposure value to IC 88.57mW.