GB TOOLS 2014/2015 WELL DONE.
Our Philosophy GB Products. Well done. We have grouped our 50 years of experience in developing and manufacturing high-performance equipment into two basic product lines. All the Red products represent our accumulated skills in product design and development. This is where exclusive, ergonomical design combines with practical functions, premium craftsmanship and good service for improved performance and better quality to meet the most demanding customer requirements.
Tools Handheld electric tools Stationary Tools Screwing 5 Drilling / Hammer drilling 7 Mixing 8 Cutting 9 Milling / Planing / Grinding 10 Sawing 12 Other tools 13 Woodworking technology 14 Compressed air technology 16 Welding technology 23 Metalworking technology 27 Lifting equipment 30 Firewood Cutting 33 Power generation 34 Service 36 Einhell Germany AG recommends accessories from Note: For safe handling of the products please refer to the instructions in the operating m
CORDLESS SCREWDRIVER CORDLESS DRILL BT-SD 4,8 F BT-CD 14,4 2B Nm R/L NiCd n0 = 200 min-1 3-5 h 4.8 V / 0.6 Ah 230 V ~ 50 Hz Pivot joint | Lamp | Clockwise / counter-clockwise switch | Charging supply unit | 28 screwdriver bits | 8 socket wrench sockets | Holder for wrench sockets | Magnetic bit holder SCREWING 0.4 / 1.2 kg 5 310 x 160 x 70 mm 2 x NiCd 14.4 V / 1.3 Ah n0 = 0 - 550 min-1 21 + 1 Steps Electronic Ø max.
CORDLESS SCREWDRIVER CORDLESS DRILL CORDLESS DRILL BT-SD 3,6/1 Li BT-CD 10,8/1 Li Kit BT-CD 14,4 Li Lithium-Ion Batteries from Einhell Small and easy to handle Powerful even after prolonged storage, no self-discharge Nm Li-Ion n0 = 200 min-1 3.6 V / 1.3 Ah No memory effect With active cell monitoring for maximum safety and battery life Nm 8 + 1 Steps 3-5 h 230 V ~ 50 Hz R/L 1 x Li-Ion n0 = 0 - 600 min-1 10.8 V / 1.
DRILLING / HAMMER DRILLING IMPACT DRILL IMPACT DRILL BT-ID 550 E BT-ID 710 E 230 V ~ 50 Hz 550 W 230 V ~ 50 Hz 710 W 10 mm 13 mm 10 mm 13 mm n0 = 0 - 2700 min-1 n0 = 0 - 43200 min-1 25 mm Ø max. 13 mm Soft grip | Clockwise / counter-clockwise switch | Keyless chuck | Metal depth stop | Additional handle | Speed control electronics with speed preselection 1.8 / 2.1 kg 10 290 x 235 x 73 mm 25 mm Ø max.
ROTARY HAMMER SDS-PLUS DRILL BIT AND CHISEL SET BT-RH 1600 DEMOLITION HAMMER FLAT CHISEL HEXAGON FOR BT-DH 1600/1 BT-DH 1600/1 HIGH QUALITY COMPONENTS POWER For all rotary hammers | 12 pieces, in aluminium case: 10 drill bits (Ø 5 - Ø 16 mm), 2 chisels Hexagon 30 mm | Width 34 mm | Length 410 mm 1 1 Article number 230 - 240 V ~ 50 Hz 1600 W 32 mm Ø 68 mm n0 = 800 min-1 n0 = 3900 min-1 4J Stop Stop 42.580.90 230 V~ 50 Hz 5.6 / 7.
ANGLE GRINDER ANGLE GRINDER BT-AG 500 BT-AG 850 230 V ~ 50 Hz 500 W M 14 Spindle lock n0 = 11000 min-1 Ø 115 mm Spindle lock | Metal gear head | Disc guard | Additional handle | Flange nut wrench | Cutting disc not included 1.6 / 1.
MILLING / PLANING / GRINDING MASONRY CHANNEL CUTTER ROUTER BT-MA 1300 BT-RO 1100 E Kit 230 V ~ 50 Hz 1320 W 8 - 30 mm 8 - 26 mm n0 = 9000 min-1 Ø 125 mm Infinitely variable cutting depth | Groove widths via spacer rings | Integrated dust extraction | Soft start | Overload cut-out | Spindle lock | Additional handle 4.9 / 5.5 kg 3 405 x 295 x 240 mm Ø 8 mm Ø 6 mm Electronic n0 = 11000 30000 min-1 max.
MULTIFUNCTION TOOL GRINDING AND ENGRAVING TOOL SET DELTA SANDER BT-MG 220 E BT-MG 135/1 BT-DS 180 230 V ~ 50 Hz 220 W 15000 22000 min-1 3° 90 x 90 x 90 mm 2m Wood 32 mm 50 mm Saw blade (32 mm wide) | Spade | Sanding plate with Velcro fastening | Sanding paper | Dust extraction adapter | Hex key | Soft grip | Speed control electronics | Aluminium gear head 1.8 / 2.0 kg 6 335 x 93 x 110 mm 230 V ~ 50 Hz 135 W 10000 32000 min-1 Ø 0.5 / 1.6 / 2.4 / 3.
JIGSAW PENDULUM JIGSAW PENDULUM JIGSAW BT-JS 400 E BT-JS 650 E BT-JS 800 E 230 V ~ 50 Hz 400 W PE/PP 10 mm 55 mm 45° - 0° - 45° 800 - 3000 min-1 18 mm 1.8 / 2.
HOT GLUE GUN GLUE CARTRIDGES FOR ALL HOT GLUE GUNS BT-GG 200 P Ø 11 x 200 mm | 24 pieces 1 Article number 230 V ~ 50 Hz 12 W (max. 72 W) Ø 11 mm 45.221.99 ca. 5 min 4 006825 455021 ca. 150° C STAPLE / NAIL SET FOR BT-EN 20 STAPLE / NAIL SET FOR BT-EN 30 E Staples: 1000 pcs. 14 x 10 mm, 500 pcs. 12 x 10 mm, 500 pcs. 10 x 10 mm | Nails: 500 pcs. 16 mm, 500 pcs. 14 mm Staples: 300 pcs. of each size: 25 x 6, 20 x 6, 15 x 6 mm | Nails: 600 pcs. of each length: 32 mm, 20 mm, 500 pcs. 25 mm, 400 pcs.
BELT AND DISK SANDER WOODWORKING LATHE BT-US 400 BT-WW 1000 GRINDING BELT SET FOR BT-US 400 LATHE BLADE SET FOR BT-WW 1000 3 pieces | Width / Length 100 x 914 mm | Grit size 60 / 80 / 120 K 5 pieces | Flat and round-nose chisel | Gouge chisel | Round and pointed chisel 1 1 Article number 230 V ~ 50 Hz 375 W S2 30 min Ø 150 n0 = 1450 min -1 230 V ~ 50 Hz 350 W S2 30 min n0 = 810/1180/ lmax = 1000 mm 1700/2480 min-1 Ømax = 356 mm 44.198.
COMPRESSOR KIT COMPRESSOR COMPRESSOR COMPRESSOR BT-AC 180 KIT BT-AC 200/24 OF BT-AC 200/50 OF BT-AC 240/50/10 OF 230 V ~ 50 Hz 1.1 kW (1.5 HP) n0 = 2850 min-1 S3 25% 230 V ~ 50 Hz 1.1 kW (1.5 HP) n0 = 2850 min-1 230 V ~ 50 Hz 220 - 240 V 1.1 kW (1.5 HP) n0 = 3550 min-1 ~ 50 Hz S3 15% 8 bar max. 180 l/min 8 bar max. 140 l/min l 3m Oilfree 5.8 / 6.
SHORT BLOW-OUT PISTOL LONG BLOW-OUT PISTOL For all compressors TIRE PRESSURE GAUGE For all compressors 1 Working pressure 0 - 8 bar | Incl. discharge nozzle 1 Article number 41.331.00 4 006825 411065 1 Article number 41.331.02 Article number 41.370.00 4 006825 411164 4 006825 417067 TIRE PRESSURE GAUGE PROFI PAINT SPRAY GUN WITH GRAVITY-FEED CAN PAINT SPRAY GUN PROFI WITH GRAVITY-FEED CAN PAINT SPRAY GUN WITH SUCTION-FEED CAN Working pressure 0 - 8 bar | Incl.
AIR CHIPPING HAMMER SET DMH 250/2 AIR ROD GRINDER SET DSL 250/2 COMPRESSED AIR ECCENTRIC SANDER DSE 125 AIR TACKER SET DTA 25/2 Working pressure max. 6.3 bar | Air consump. approx. 115 l/min | Blow rate 4500/min Working pressure max. 6.3 bar | Air consump. approx. 128 l/min | Idling speed 22000 min-1 Grinding disk Ø 125 mm | Working pressure max. 6.3 bar / Air consump. approx. 106 l/min Working pressure max. 8.3 bar | Air consump. approx. 0.11 l/shot | Clamping width 5.
COMBINATION CONDITIONING UNIT WITH OILER Adjustable oil quantity 1 COMPLETE SPIRAL HOSE COMPLETE SPIRAL HOSE Length 4 m / Ø 6 mm | Maximum pressure 8 bar | Nipple and coupling 6.35 mm (1/4") Length 8 m / Ø 6 mm | Maximum pressure 8 bar | Nipple and coupling 6.35 mm (1/4") 1 Article number 41.350.00 4 006825 410075 1 Article number 41.394.10 4 006825 411737 Article number 41.394.
HOSE CONNECTOR SET DN7 ATTACHABLE SLEEVE Ø 6 mm | One-hand quick-lock coupling 1 Ø 6 mm 41.395.00 4 006825 410136 HOSE CONNECTION TUBE 41.396.60 4 006825 411690 HOSE NOZZLE 4 006825 581652 4 006825 581621 41.396.65 4 006825 581676 R 3/8" external thread R 1/4" internal thread R 3/8" internal thread 1 4 006825 411683 DOUBLE NIPPLE 41.396.40 4 006825 411676 REDUCTION 1 41.396.10 4 006825 411645 Weight net / gross 41.396.45 4 006825 581683 41.396.
DISTRIBUTOR CLIP KIT R 3/8" internal thread MICHELIN-NIPPLE 1 1 Article number DN 6 For external diameters of 8 - 12 mm | 5 pieces 41.396.80 4 006825 411713 Article number 1 41.396.70 4 006825 411706 Article number 41.393.30 4 006825 588712 INFLATION ADAPTER KIT 8 pieces 1 Article number 41.396.95 4 006825 511475 Note: For safe handling of the products please refer to the instructions in the operating manual.
ELECTRIC WELDER ELECTRIC WELDER ELECTRIC WELDER BT-EW 150 BT-EW 160 BT-EW 200 230 V ~ 50 Hz 16 A I2: 40 - 80 A Ø 1.6 - 2.5 mm Ik max.: 120 A Infinitely adjustable welding current | Thermostat with pilot lamp | Carry handle 11.2 / 12.1 kg 1 400 x 230 x 290 mm 230/400 V ~ 50 Hz 16 A I2: 55 - 160 A Imax: 250 A Ø 2 - 4 mm Fan cooling | Infinitely adjustable welding current | Thermostat with pilot lamp | Mobile | 2 mains lead 20.6 / 22.7 kg 1 490 x 280 x 335 mm Article number 15.440.
SHIELDING GAS WELDER SHIELDING GAS WELDER SHIELDING GAS WELDER BT-GW 150 BT-GW 170 BT-GW 190 D WELDING TEXTBOOK “PRACTICAL WELDING“ For all conventional welding methods | In German language 1 Article number 230 V ~ 50 Hz Ø 0.6 - 0.8 mm 16 A max. 5 kg 6x 25 - 120 A (max. 150 A) Infinitely Ø 0.6 - 0.8 mm Fan cooling | Thermostat with pilot lamp | Complete with flexible hose pack | Infinitely adjustable wire feed | Gas-cooled torch | Welding shield | Pressure reducer | 2 wheels 25.4 / 28.
ELECTRODE HOLDER FOR ALL ELECTRIC WELDERS ANGLE MAGNET FOR ALL WELDING SETS Max. welding current 250 A GAS NOZZLE CLEANER FOR ALL SHIELDING GAS WELDERS 45 °/ 90° / 135° 1 With 3 flexible cleaning blades 1 Article number 15.927.00 4 006825 156812 CONICAL GAS NOZZLE FOR ALL SHIELDING GAS WELDERS 1 Article number 15.922.
WELDING WIRE: STEEL FOR ALL SHIELDING GAS WELDERS WELDING WIRE: STEEL FOR ALL SHIELDING GAS WELDERS Ø 0.6 mm | Weight 5 kg Ø 0.8 mm | Weight 0.8 kg 1 15.763.11 4 006825 156089 WELDING WIRE: CrNi FOR ALL SHIELDING GAS WELDERS 15.767.02 4 006825 157000 FLUX CORED WELDING WIRE FOR BT-FW 100 Ø 0.6 mm | Weight 0.6 kg 4 006825 156171 ROD ELECTRODES FOR ALL ELECTRIC WELDERS 15.762.
BENCH DRILL BENCH DRILL BENCH DRILL BT-BD 401 BT-BD 501 BT-BD 701 BT-BD 801 E 230 V ~ 50 Hz 350 W S2 15 min n0 = 650 3000 min-1 1.5 - 13 mm -45° – 45° 104 mm max. 50 mm Infinite table height adjustment | Scroll chuck | Adjustable depth stop for precise drilling | Tilting and pivoting drill table | Drilling spindle with ball bearings 9.9 / 15.8 kg 1 458 x 355 x 228 mm Article number 230 V ~ 50 Hz 500 W S2 15 min n0 = 280 2500 min-1 3 - 16 mm -45° – 45° 115 mm max.
BENCH DRILL BENCH DRILL BENCH DRILL WET-DRY GRINDER BT-BD 1020 BT-BD 1020 D BT-BD 1625 D BT-WD 150/200 230 V ~ 50 Hz 700 W S2 15 min n0 = 210 2500 min-1 3 - 16 mm -45° – 45° MK2 to 20 mm 169 mm max. 80 mm Infinite table heigh adjustment | Quick-change drill chuck | MK2 chuck | Swiveling scale ring for precise setting of the drill depth | Tilting and pivoting drill table | Vise supplied | Drilling spindle with ball bearings 52.5 / 54.
METAL LATHE LATHE CHISEL KIT FOR BT-ML 300 BT-ML 300 LIVE LATHE CENTER FOR BT-ML 300 DE: price/performance ”Very Good“ 11 pieces | HSS chisels Taper MK 2 1 1 Article number 230 V ~ 50 Hz 370 W 0 - 1100 min-1 0 - 2500 min-1 45.050.20 Article number 45.050.24 l max 300 mm 4 006825 556681 FOUR JAW CHUCK FOR BT-ML 300 max. Ø 70 mm max.
ELECTRIC HOIST ELECTRIC HOIST ELECTRIC HOIST ELECTRIC HOIST BT-EH 250 BT-EH 300 BT-EH 500 BT-EH 600 230 V ~ 50 Hz 500 W S3 20% 10 min max. 5.7 m max. 250 kg max. 11.5 m max. 125 kg Fastening with two bar clips | Operator switch with emergency stop function | Guide roller with load hook | Motor with thermal switch | Automatic load securing brake | Load hook with safety catch | Automatic limit cut-out for rolling out 9.8 / 10.
ELECTRIC HOIST CHAIN HOIST BT-EH 1000 BT-CH 1000 SWING ARM GT-SA 1200 FOR HOISTS Length 1100 mm | With reach of 750 mm max. load 600 kg | With reach of 1100 mm max. load 300 kg 4 Article number 230 V ~ 50 Hz 1600 W S3 25% 10 min max. 5.7 m max. 999 kg max. 11.5 m max.
LOG CUTTING SAW LOG CUTTING SAW LOG SPLITTER BT-LC 400/2 BT-LC 700 /1 D BT-LS 44 DE: price/performance ”Good – Very Good“ DE: price/performance ”Good“ DE: rating ”Good“ • Urteil Einhell BT-LS 44 230 V ~ 50 Hz 2200 W S6 40% HW / TCT t = 40 Ø max. 125 mm n0 = 2860 min-1 HW / TCT Ø 400 x Ø 30 mm Carbide metal saw blade | Carriage extension | Carriage with hooks | Length stop 33.1 / 39.1 kg 1 1100 x 745 x 520 mm 400 V 3 ~ 50 Hz 4500 W S6 20% CV t = 64 Ø max.
GENERATOR GENERATOR GENERATOR GENERATOR BT-PG 850/2 BT-PG 2000/2 BT-PG 2800/1 BT-PG 3100/1 230 V ~ 50 Hz 650 W (max. 720 W) 1.2 kW (1.65 HP) 63 cm3 4,2 l Mixture 1 : 40 (2 ,5 %) Powerful 2-stroke engine, air-cooled | Synchronous generator | Carry handle for easy transport | Overload switch for appliance safety | Automatic voltage controller (AVR) | Reversing starter to start the machine 16.0 / 17.6 kg 1 390 x 350 x 335 mm Article number Weight net / gross 4.0 kW (5.
GENERATOR GENERATOR GENERATOR BT-PG 4000 BT-PG 5500/2 D BT-PG 5000 DD 400 V 3 ~ 50 Hz 2 x 230 V ~ 50 Hz 3000 W 3600 W (max. 5500 W) (max. 3300 W) 3000 W 1 x 12 V d.c. 400 V 3 ~ 50 Hz (max. 3300 W) (max. 100 W) 4200 W (max. 5000 W) 2 x 230 V ~ 50 Hz 4.89 kW / 3300 W (6.7 HP) (max. 3800 W) 24 l Petrol 7.0 kW (9.
GB We´re always here to help - and that´s a promise! Is there anything you´d like to ask us about our products? Would you like to order a part? Your product isn´t working as it should? We´re at your service! We´ll get you some help - fast and without any fuss. iSC GmbH, Eschenstr. 6, 94405 Landau/Isar, Deutschland +49 (0) 9951 959 2000 (Landline charge 14 cent / min.) (Cell phone charge 42 cent / min.) +49 (0) 1805 835 830 www isc-gmbh.info info @ isc-gmbh.