Manual

GB
- 21 -
3. Proper use
This pillar drill is designed for drilling metal, plas-
tic, wood and similar materials. It is intended for
use in the private sector only.
Food and harmful materials may not be pro-
cessed with the equipment. The drill chuck is only
designed for use with drill bits and tools with a
shaft diameter of 1 to 13 mm, and for cylindrical
tool shanks. Tools with a tapered shank can also
be used. The equipment is intended for use by
adults only.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Technical data
Nominal input voltage ............ 230-240V ~ 50 Hz
Nominal output ....... 450 W S1, 550 W S2 15 min
Motor speed ....................................... 1400 min
-1
Output speed (infi nitely adjustable) .....................
......................................................450-2500 min
-1
Drill chuck mount ........................................ B 16
Scroll chuck ...................................... Ø 0-13 mm
Reach .................................................... 115 mm
Dimensions of drill table ............... 170 x 170 mm
Angle adjustment of ............... table 45° / 0° / 45°
Drill depth ................................................. 60 mm
Pillar diameter .......................................... 46 mm
Height .................................................... 770 mm
Base area ..................................... 215 x 340 mm
Weight ............................................... ca. 21.5 kg
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with EN 62841.
L
pA
sound pressure level ....................... 76 dB (A)
K
pA
uncertainty .............................................3 dB
L
WA
sound power level ...................... 81.8 dB (A)
K
WA
uncertainty .............................................3 dB
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
The stated vibration emission levels and stated
noise emission values were measured in ac-
cordance with a set of standardized criteria and
can be used to compare one power tool with
another.
The stated vibration emission levels and stated
noise emission values can also be used to make
an initial assessment of exposure.
Warning:
The vibration and noise emission levels may vary
from the level specifi ed during actual use, depen-
ding on the way in which the power tool is used,
especially the type of workpiece it is used for.
Keep the noise emissions and vibrations to
a minimum.
•
Only use appliances which are in perfect
working order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever
necessary.
•
Switch the appliance off when it is not in use.
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment’s construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear
protection is used.
3. Health damage caused by hand-arm
vibrations if the equipment is used over a
prolonged period or is not properly guided
and maintained.
Anl_TE_BD_550_E_SPK9.indb 21Anl_TE_BD_550_E_SPK9.indb 21 16.06.2020 12:46:3816.06.2020 12:46:38